ASI BAC855 upgrade kit for INOKIM OXO

Aprašymas

ASI BAC 855 „plug and play” arba kitaip pasijungei ir naudoji versija.

Mes paruošime naujuosius valdiklius taip, jog nereikės nei lituoti, nei ką nors perdarinėti. Visos jungtys sutampa.

Paprasčiausiai atsidarysite paspirtuko apačią, išimsite senus ir pakeisite naujaisiais valdikliais.

Šie du ASI BAC 855 valdikliai gali būti naudojami su Inokim OXO paspirtukų. Norint išnaudoti visą valdiklių atiduodamą galią privaloma pasikeisti bateriją, kuri galėtu atiduoti bent 160a.

 

Prieš pirkdami, turite nurodyti kokia bateriją naudojate:

1 variantas – originali Inokim oxo 60v. 25,6ah. (valdikliai bus sukonfigūruoti 2x 106a ir 1500w = 3000w).

2 variantas – originali Inokim oxo 60v. 25,6ah. su BMS apėjimo funkcija, tačiau tai yra rizikinga iškrauti bateriją per daug (valdikliai bus sukonfigūruoti 2x 106a ir 2100w = 4100w).

3 variantas – 60v., pagal užsakymą gaminta, galinti atiduoti 160a. (valdikliai bus sukonfigūruoti 2x 106a ir 6250w = 12 500w).

4 variantas – 72v., pagal užsakymą gaminta, galinti atiduoti 160a. (valdikliai bus sukonfigūruoti 2x 106a ir 7500w = 15 000w).

 

Maksimalus greitis su 72v baterija padidėja net iki ~137km/h (testuota su 67kg žmogumi).

 

Originalių stabdžių davikliai bus nebenaudojami.

Kartu siūlome įsigyti varikliam aliuminį radiatorių.

Variklio radiatorius – padidina kaitinimo plotą ant variklio bei besisukdamas pučia vėją taip aušindamas variklį.

 

Variklio aušinimo pasirinkimai:

2 Variantas – aliuminis radiatorius (oranžinė spalva).

3 Variantas – aliuminis radiatorius (juoda spalva).

NONE – variklio aušinimo reikmenų nereikia.

————————————————————————-

Most improved, with a lot of power and functions DUAL ASI BAC855 plug and play version for Inokim OXO scooter.

With this setup we worked more than 3 years to present you the best quality and abilities with this controller!

We will prepare the new controller, that you will not need to solder or remake anything.

Simply open the bottom of the scooter, remove the old one and replace it with a new controller

One controller size: 81mm x 55mm x 39mm
One controller weight: 300 grams.

During the installation, make sure that the new controller and cables are protected from dirt and water.

These two ASI BAC 855 controllers can be used with OXO scooters. In order to use all BAC 855 power, it is necessary to replace the battery, which could give at least 160a.

Using original Inokim oxo battery, controllers power will be limited.

Before you buy, you must specify which battery you are using:

• Original Inokim OXO battery – 60v. 25,6ah. (controller will be configured – 2x 106a and 1500w = 3000w).
• 60v., custom-made battery, can give-out 160a. (controller will be configured 2x 106a and 6250w = 12 500w).
• 72v., custom-made battery, can give-out 160a. (controller will be configured 2x 106a and 6500w = 13 000w).

 

Maximum speed increases up to ~137km / h (tested with 65kg person, 72v. battery and modified motors which you can buy in our store).

Motor radiator – increases the heating area on the engine and blows the wind while cooling the engine.

Also you have to chose which display you want to use with your scooter because you must to change original throttle with screen.

• 750C display:

• Eggrider V2:

 

 

Expert Tuning and Support

Every customer receives a private remote programming session with one of our engineers to ensure your controller is perfectly tuned to your riding style and preferences. They will also double-check your installation and provide valuable insights into maximizing your riding experience

Even more:

• Power Adjustment via Screen: Conveniently adjust the power output directly from the display, tailoring your riding experience to your preferences.

• Assist Level Adjustment in Percent %: Fine-tune the assist level in percentage increments, ensuring a personalized riding experience that suits your riding style and terrain.

• Wheel Size Adjustment for Accurate Speeds: Accurately gauge your speed by adjusting the wheel size setting, providing more precise speed readings.

• Compatibility with Multiple Screens: Choose from a variety of compatibility screens, including 750C and Eggrider V2, ensuring a seamless integration with your preferences.

• Motor Overheating Protection: Safeguard your motor from overheating by implementing a robust protection system that monitors motor temperatures and reduces power output when necessary.

• 48V – 72V Battery Compatibility: Utilize a wide range of batteries, from 60V to 72V, ensuring compatibility with your current setup or future battery upgrades.

• Battery Wear Protection: Preserve battery life by implementing a smart power reduction mechanism that automatically adjusts power output when battery levels are low.

• Plug-and-Play Installation: Enjoy effortless installation with a plug-and-play design that eliminates the need for complex wiring or modifications.

• Speed Unit Change (km/h – mph): Conveniently switch between kilometers per hour (km/h) and miles per hour (mph) units, adapting to your preferred speed measurement.